Site SWMS

Workers On Site:

Hazard Identification - High Risk Activity

Please Tick:

You are aware that you are working in a high risk environment

Please Select Potential High Risk Hazards On Your Work Site

List of Other Potential Hazards To Consider

Other Potential hazards to consider but not limited to are:
- High pressure water or gas
- Chemicals
- Vehicles
- Vibration
- Moving Objects
- Site Access
Trip Hazards
Hot or cold objects
Tools
Trenches
UV Radiation
Unstable Surfaces

Person responsible for ensuring compliance with SWMS

Site SWMS

This form MUST be read, completed and agreed to by all workers BEFORE entering the worksite. 

Job Site Details

Select your name from the dropdown menu

This SWMS Document has been approved by the management of Teksol Electrical Solutions - 2020

Hazard Identification - High Risk Activity

Please Tick:

You are aware that you are working in a high risk environment

Please Select Potential High Risk Hazards On Your Work Site

Please note that you must use a full facial respirator when cutting cement sheet, tile or laminate melamine board 

List of Other Potential Hazards To Consider

Other Potential hazards to consider but not limited to are:
- High pressure water or gas
- Chemicals
- Vehicles
- Vibration
- Moving Objects
- Site Access
- Trip Hazards
- Hot or cold objects
- Tools
- Trenches
- UV Radiation
- Unstable Surfaces

- Silica Dust Particles

Please Tick:

You have read through the list of potential hazards and understand the risks involved on this worksite

Please mention any other hazards that might be on your worksite

Correct Use Of PPE

You must always use the correct work PPE including appropriate clothing, footwear and safety equipment. PPE must be kept in a good clean & serviceable condition at all times.

Please tick required PPE for this worksite:

Safety Instructions

Please read and adhere to the bellow safety instructions

At any time you feel that yourself or others are in danger or harm of potential hazards, please cease work immediately, leave the worksite and contact your manager or senior representative about the issue. 
At no time should you or others be in harms way in the work place. 
At no time should you ever work on live parts.
All electrical tools should be appropriately insulated.
All leads should be test & tagged every 3 months accordingly.
 

The above mentioned is YOUR responsibility. Do you agree to all safety instructions?

Control Measures To Reduce Risk

Please open the relevant control measures documentation bellow and read.

Control Measures - Electrical Installation

Control Measures - Repairs & Maintenance 

Control Measures - Split System A/C

​

​

​

​

Control Measures - Working @ Heights 
Including EWP & Ladders

You and all staff members on site have read the appropriate control measures for the specific works you are undertaking and agree to the responsibility of following those control measures

Hierarchy Of Control - System to asses and eliminate hazards

1. ELIMINATION – eliminate the hazard entirely.

2. SUBSTITUTION – replacing the material or process with a less hazardous one.

3. ENGINEERING – redesign the equipment or work process to reduce or eliminate the risk.

4. ISOLATION – isolate the hazard from persons by enclosing or guarding.

5. ADMINISTRATION – adjusting the time or conditions of risk exposure, procedures to manage the risk.

6. PERSONAL PROTECTIVE EQUIPMENT – using appropriately designed and properly fitting equipment where other controls are not practicable.

Additional Safety Notes To Report

Plant, Tools & Equipment Used For This Job

Relevant Legislation, Codes of Practice & Compliance Codes

• Occupational Health and Safety Act 2004

• Occupational Health and Safety Regulations 2017

• Communicating occupational health and safety across languages: Compliance code 2008

• First Aid in the workplace: Compliance Code 2008

• Hazardous Manual Handling: Compliance Code 2018

• Hazardous substances: Compliance Code 2018

• Workplace amenities and work environment: Compliance Code 2008

• Plant: Compliance Code 2018

COVID-19 Response

Please ensure you regularly disinfect yourself along with your tools and clothing. Keep yourself 1.5m Distance from other people at all times, including clients. Make sure to remind clients of this need. Use respirator when required and refrain from touching your face or mouth. Limit touching things that you can avoid as apart of the job.

Emergency Response - Dial 000

If work is to be conducted on a construction site (or a site controlled by another Employer / PCBU) follow the site-specific Emergency Management Plan. Ensure:

• Adequate numbers of first aid trained staff are on site

• First aiders are trained & competent in managing injuries until emergency services arrive

• All rescue equipment is in good condition, available for use and in close proximity to the work site.

Ensure workers have access to:

• First aid kit/supplies

• First Aid trained personnel familiar with resuscitation and emergency response for electric shock

• M/SDS

• Communication devices (check mobile phones will have service in area)

• Suitable fire protection equipment.

Incident Reporting

All incidents must be reported. Please follow the below link to report and workplace incidents

INCIDENT REPORTS

Principle Contractor On-Site

Person Who's Email Receives This SWMS

Your Name

Your SWMS has been submitted

An error occurred. Please check all information has been entered and try again.